[China Glass Net] With the development of glass technology, the requirements for glass processing in the industry are getting higher and higher, and the polishing technology of glass is becoming more and more fine. Therefore, the requirements for polishing powder are higher, and the technical work is on polishing the glass. when, if the operation does not stop, it will cause damage to the glass can, in order to avoid damage caused by this man, small items of note glass polishing powder used was a small sum <br> <br> a glass polishing Attention check Wooden Wine Box,Custom Sized Cardboard Boxes,Flat Pack Gift Boxes,Wine Shipping Boxes Shenzhen Yi Ding Peng Packaging Design Co., Ltd. , https://www.szydppackages.com
1. Check that the tools used in the polishing are complete. Only the equipment is ready, and the tool has no problem to polish the good glass.
2. Check the surface of the clean glass and the glass polishing sandpaper, and do not have any dust, sand, etc. attached.
3. Before the glass is polished, check whether the position of the glass to be polished is clearly divided, avoiding the polishing area being too large, and polishing the glass that should not be thrown.
4. Check if the tape around the edge of the glass to be repaired is tightly closed to avoid staining the car and the surrounding environment when the glass is polished.
5. Check whether the polished glass is sanded or not. If it is polished, it will cause problems.
Second, the use of polishing powder in the polishing of glass
At present, there are three methods commonly used for polishing glass, such as acid polishing, fire polishing, and polishing powder polishing. Nowadays, more polishing is used in the industry.
1. When using glass polishing powder, first clean the surface of the glass. When spraying the polishing powder, it is better to sprinkle a layer of water on the surface of the glass, so that the polishing powder can be bonded faster and the glass is polished. The powder does not easily fall off, and this also prevents the polishing powder from falling off during use. After sprinkling with the polishing powder, mix thoroughly, so that the effect is good.
2. After the polishing powder is sprinkled on the glass, the glass is polished with a wool polishing wheel, so that no flaws occur when the glass is used, and the user can enhance the use of the glass when using the glass. Experience.
3. When the glass polishing powder is used, in order to make the polishing powder not fall during use, it is better to remove the dust and garbage on the surface of the glass when the polishing powder is sprinkled, so that the sprayed glass polishing powder is used. Can not easily fall off.
The use of polishing powder in glass polishing, the first important thing is the cleaning of the glass, preparation before polishing, careful attention during polishing, careful polishing, attention to concentration, skilled operation, in order to throw a better glass, for The use of polishing powder, more can draw on the above considerations.