Tetra Pak is a button product commonly used in clothing. At the same time, it is also a product with many problems. Today, I received a complaint from a customer. The customer asked me if my four-pronged New Zealand hits the clothes. Pull it off. Did I start thinking that the client was joking? Before the shipment of our company's products will be tested according to the customer's request to try samples, confirm the correct delivery, how can this be? The common quality problem of the quadruple Newton is that after the assembly, the flute or AB or CD assembly fails to reach the standard, and after the assembly of the slingshot and New Bead, the pull force on the buckle is not even, loose or too tight. There are problems with the quality of the quadruple nucleus product itself, as well as the customer's handling problems during the process of assembling the button product. For example, the zipper moulding system has problems and the moulding is not installed during assembly, or the moulding is not used during assembly. Drilling caused. 1, quadruple New Zealand itself quality issues The maximum demand for the deduction of the four is the control of tension, and the prerequisite is the choice of copper material. If the copper material is too thin, or the material is too poor to meet the pull force requirements, the Quadruple New York must be easy to lose. Therefore, the material of quadruple New Zealand and its importance should be selected high-quality thick copper material, the material of the product is thick, at the same time, the pressure, impact force and pulling force are also increased. 2, four-inch mold problem Snap buckle A + B + C + D surface as long as the clothes with the mold, the general clothes as long as it is not particularly thick, will not fall off to play. One of the possibilities for removing the product without quality problems is the cause of the mold. One is that when the die is riveted with the A-side and the B-side, the A-side tube is not flat and is rolled on both sides of the surface. It's a direct fight. The second is that the C-side and D-side are not pressed when the die is riveted. It is recommended that customers use the matching molds, and the molds should be adjusted during use. 3, four-inch Newton needs to use hole punching die before assembly There are no sharp corners in the four-ply button fittings. Before the assembly, holes must be made in the fabric using a punching die. However, the holes must not be opened too large. Otherwise, the product will be pulled out when the buttons are separated. In addition to the above problems that may arise, it also has a certain relationship with the machine that plays the button. In the process of using the machine for a long period of time, there will be less loss, and when the quadruple Newton is played, the orientation will move and the mold will be unevenly stressed. This will also affect the riveting of the quadruple New Zealand. Want to learn more about buttons: accessible For more details, please pay attention to WeChat public number:
A little boy can choose black, yellow, light blue, off-white, orange, or gray, khaki, apricot to wear a sweater. The colors are more atmospheric and don't pick skin color. Anyone can control it. It can be matched with The shape of the cartoon pattern.
We also have a variety of children's clothing for sale, welcome to consult us. Gongguan Yumuran Garment Co. Ltd is a clothing industry enterprise engaged in many years, mainly selling baby Boys jackets, baby Girls jackets, custom baby jackets, custom baby coats, baby coats, baby boys coats.
boy sweater,baby boy sweater,poor boy sweater Dongguan Yumuran Garment Co.Ltd , https://www.onemovingkidsjacket.com
